DE10 Advance revC demo: System Requirements

From Terasic Wiki

Revision as of 16:12, 27 August 2018 by Bingxia (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Before starting this tutorial, please note that the following items are required to complete the demonstration project:

  • Terasic DE10-Advanced FPGA board, includes
  • Mini USB Cable for UART terminal
  • Micros SD-Card, at 4GB minimum
  • Micros SD-Card Card Reader
  • A x86 PC
  • Windows 10 64 bit operation system Installed
  • One USB Port
  • Quartus Prime 18.0 or Later Installed
  • SoC EDS 18.0 or Later Installed
  • Win32 Disk Imager Installed

Back

Retrieved from "http://www.terasic.com.tw/wiki/DE10_Advance_revC_demo:_System_Requirements"
Personal tools