DE10 Advance revC demo: Use Linux BSP
From Terasic Wiki
This section describes the procedure to boot Linux on DE10-Advanced Board. For more details, refer to chapter 5 of DE10-Advanced_Getting_Started_Guide.pdf in the System CD.
- Download the BSP image file from http://de10-advanced.terasic.com/cd
- Create a Linux booting microSD card by using Win32 Disk Imager utility to write the image file into a microSD card
- Insert the microSD to microSD socket on the DE10-Advanced
- Make sure MSEL[2:0] switch on DE10-Advanced is set to proper position
- For VNC mode:
- Connect your host PC to USB-to-Serial port(J27) on DE10-Advanced via a USB cable
- Launch the Putty software in your PC
- The booting message will appear on the Putty terminal
- In host PC, use vnc client to connect to DE10-Advanced
- For HDMI mode:
- Connect a HDMI monitor, an USB keyboard, and a USB mouse to the DE10-Advanced with USB Hub
- Power on DE10-Advanced
- The LXDE Desktop will appear on the HDMI monitor