DE10 Advance revC demo: Use Linux BSP

From Terasic Wiki

You do not have permission to edit this page, for the following reason:

You can view and copy the source of this page:

This section describes the procedure to boot Linux on DE10-Advanced Board. For more details, refer to chapter 5 of DE10-Advanced_Getting_Started_Guide.pdf in the System CD. *Download the BSP image file from http://de10-advanced.terasic.com/cd *Create a Linux booting microSD card by using Win32 Disk Imager utility to write the image file into a microSD card *Insert the microSD to microSD socket on the DE10-Advanced *Make sure MSEL[2:0] switch on DE10-Advanced is set to proper position *For VNC mode: :*Connect your host PC to USB-to-Serial port(J27) on DE10-Advanced via a USB cable :*Launch the Putty software in your PC :*The booting message will appear on the Putty terminal :*In host PC, use vnc client to connect to DE10-Advanced *For HDMI mode: :*Connect a HDMI monitor, an USB keyboard, and a USB mouse to the DE10-Advanced with USB Hub :*Power on DE10-Advanced :*The LXDE Desktop will appear on the HDMI monitor '''[[DE10-Advance_Demonstration_Manual_revC#Chapter 6 Linux BSP|Back]]'''

Return to DE10 Advance revC demo: Use Linux BSP.