Terasic USB Blaster revB Manual
From Terasic Wiki
(Difference between revisions)
Admin (Talk | contribs)
(Created page with "= Introduction to Terasic USB Blaster Download Cable = The Terasic USB Blaster Download Cable(UBT) interfaces a USB port on a host computer to an FPGA mounted on a printed circu...")
Newer edit →
(Created page with "= Introduction to Terasic USB Blaster Download Cable = The Terasic USB Blaster Download Cable(UBT) interfaces a USB port on a host computer to an FPGA mounted on a printed circu...")
Newer edit →
Revision as of 14:14, 17 December 2019
Introduction to Terasic USB Blaster Download Cable
The Terasic USB Blaster Download Cable(UBT) interfaces a USB port on a host computer to an FPGA mounted on a printed circuit board. The cable sends configuration data from the host computer to a standard 10-pin header connected to the FPGA. You can use the UBT to iteratively download configuration data to a system during prototyping or to program data into the system during production.
