Terasic USB Blaster revB Manual

From Terasic Wiki

Revision as of 14:14, 17 December 2019 by Admin (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Introduction to Terasic USB Blaster Download Cable

The Terasic USB Blaster Download Cable(UBT) interfaces a USB port on a host computer to an FPGA mounted on a printed circuit board. The cable sends configuration data from the host computer to a standard 10-pin header connected to the FPGA. You can use the UBT to iteratively download configuration data to a system during prototyping or to program data into the system during production.

Retrieved from "https://www.terasic.com.tw/wiki/Terasic_USB_Blaster_revB_Manual"
Personal tools