• Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
• 1GB DDR3 SDRAM (32-bit data bus)(HPS)
• Arduino Expansion Header (Uno R3 Compatibility), Full HD HDMI Output, UART-to-USB, USB OTG Port, Micro SD Card Socket, Gigabit Ethernet and GPIO Headers

• MAX 10 10M50DAF484C7G Device
• Accelerometer and 4-bit Resistor VGA 
• 64MB SDRAM, x16 bits data bus
• Arduino UNO R3 and 2x20 GPIO connector
• On-Board USB Blaster (Normal type B USB)

• Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
• FPGA: SDRAM, VGA Out, Video-In, ADC Header, GPIO Header HSMC Headers
• HPS: DDR3, USB Host, MicroSD Socket, Ethernet,  Accelerometer, UART-to-USB, LTC Header
• Support Linux BSP and openCL BSP

• Intel Stratix 10 GX/SX FPGA
• Four QSFP28(100GbE) connectors and one PCI Express (PCIe) x16 edge connector
• Four independent DDR4 SODIMM sockets (work with DDR4/QDR-II+/QDR-IV)

• 2.4" LCD touch module with 240(H) x 320 (V) pixel resolution LCD with 65K RGB color
• Single resistive touch
• 2x20 GPIO interface

• Drive up to 24 servo motors simultaneously 
• MG996R Servo Motor is included
• Open source example is provided

• Omnivision 8 Mega Pixel Image sensor
• Voice Coil Motor (VCM) for focus control
• MIPI Decoder
• 2x20 GPIO to compatible with DE series FPGA Board

• Configurable digital interface to a processor—RF front end with a flexible mixed-signal baseband section and integrated frequency synthesizers
• Operates in the 70 MHz to 6.0 GHz range—covers most licensed and unlicensed bands
• Tunable Channel Bandwidth—<200 kHz to 56 MHz
• Complete dual- or single-channel integrated wideband transceiver on a single chip

• 7" LCD, 800x480 Resolution,  24-bit Color
• Capacitive Touch, Multi-Touch Gesture Support, Single Touch Support
• 2x20 GPIO Interface, Compatible with DE2-115 / DE2 / DE3 /DE4

• Wi-Fi, using ESP-WROOM-02 module
• Bluetooth SPP, using HC-05 module
• 9-axis sensor: accelerometer,gyroscope,magnetometer
• Ambient light sensor
• Humidity and temperature sensor
• UART to USB
• 2x6 TMD GPIO Header 

• Intel^® Agilex™ F-Series FPGA AGFB014R24B2E2V
• Two QSFPDD connectors for 200/100/40/25/10 GbE network interface
• Four independent DDR4 SODIMM sockets
• PCIe Gen4 x16

• Use Intel Cyclone SoC FPGA to control robot's balancing system
• Support ultrasonic obstacle avoidance, object following and gesture recognition
• Support mobile phone APP to remote control via Bluetooth protocal

• 250V / 5A
• Convenient way to switch from US wall plugs to UK wall plugs
• Simple snap-on design used with Terasic Technologies's switching power supplies
• Compatibility: DE10-Nano / DE0 / DE2-115 / C5G / DE1-SoC  

As the pioneering FPGA-based product and design service supplier, Terasic never stops looking for innovating and cutting-edge ideas! This time, we challenge you to conduct a technical review and provide ideas that will ignite sparks of creativity for our flagship product, DE10-Standard. All users of Terasic FPGA board are welcome to participate in this event!

• Bluetooth v 4.0+EDR
• Class 1, wireless range of up to 50m
• Compliant to Atum A5 、 DE25-Standard 、 MA27 、 DE10-Standard and DE10-Nano Linux BSP

• The cable is 20 cm long.
• Turn your DE10-Nano into a USB host via the OTG port onboard.
• Allow you to connect USB accessories such as Flash drive, keyboard, mouse, camera, Bluetooth or Wi-Fi module to your DE10-Nano .