SoCKit Board

FPGA Device

• Cyclone V SoC 5CSXFC6D6F31 Device
• Dual-core ARM Cortex-A9 (HPS)
• 110K Programmable Logic Elements
• 5,140 Kbits embedded memory
• 6 Fractional PLLs
• 2 Hard Memory Controllers
• 3.125G Transceivers

Configuration and Debug

• Quad Serial Configuration device – EPCQ256 on FPGA
• On-Board USB Blaster II (micro USB type B connector)

Memory Device

• 1GB (2x256MBx16) DDR3 SDRAM on FPGA
• 1GB (2x256MBx16) DDR3 SDRAM on HPS
• 128MB QSPI Flash on HPS
•  Micro SD Card Socket on HPS

Communication

• USB 2.0 OTG (ULPI interface with micro USB type AB connector)
• USB to UART (micro USB type B connector)
• 10/100/1000 Ethernet

Connectors

• One HSMC (8-channel Transceivers, Configurable I/O standards 1.5/1.8/2.5/3.3V)
• One LTC connector (One Serial Peripheral Interface (SPI) Master ,one I2C and one GPIO interface )

Display

• 24-bit VGA DAC
• 128x64 dots LCD Module with Backlight

Audio

• 24-bit CODEC, Line-in, line-out, and microphone-in jacks

Switches, Buttons and LEDs

• 8 User Keys (FPGA x4 ; HPS x 4)
• 8 User Switches (FPGA x4 ; HPS x 4)
• 8 User LEDs (FPGA x4 ; HPS x 4)
• 2 HPS Reset Buttons (HPS_RSET_n and HPS_WARM_RST_n)

Sensors

• G-Sensor on HPS
• Temperature Sensor on FPGA

Power

• 12V DC input

Capacitive LCD Multi-touch Screen

• 7-inch TFT LCD with pixel resolution of 800*480
• 16 million colors (8-bit RGB)
• LED backlight

5-Megapixel Digital Image Sensor

• 2,592H x 1,944V active pixels with Bayer color arrangement
• Programmable frame rate up to 70FPS (VGA)
• Snapshot-mode mode to take frames on demand
• Simple two-wire serial control interface

Digital Accelerometer

• Up to 13-bit resolution at +/- 16g
• SPI (3- and 4-wire) digital interface
• Flexible interrupts modes 

Ambient Light Sensor

• Precise illumination measurement under diverse lighting conditions
• Programmable interrupts
• 16-bit digital output with I2C fast-mode at 400 kHz
• Programmable analog gain and Integration time
• 50/60Hz lighting ripple rejection
   

VEEK-MT-SoCKit Board Block Diagram