Newsroom About Terasic Products Turnkey Solutions Training FAQ
Cart
 
   
   





S10

Apollo S10 SoM

FPGA

  • Intel Stratix 10 Soc FPGA 1SX280HU2F50E1VG

FPGA Configuration

  • On-Board USB Blaster II for FPGA programming and Debug
  • AS Mode configuration from QSPI Flash

Clock and User Interface

  • Four 50Mhz Single-ended Clock Source
  • One 100Mhz Single-ended Clock Source
  • Clock Generator Si5341
  • LED x2, Button x2, Dip Switch x2, CPU Reset
  • Power Switch
  • FMC Voltage 1.8V/1.5V/1.2V Selection
  • FMC+ Voltage 1.8V/1.5V/1.2V Selection

Memory

  • 1024Mbit QSPI Flash (EPCQL1024 Compliant)
  • Total of 64GB DDR4 x72 2133MT/s with ECC
    • Two independent DDR4 banks
    • One bank is shared with FPGA and HPS

Communication and Expansion

  • FMC (Vita57.1) connector with 10 transceivers
  • FMC+(Vita57.4) connector with 24 transceivers

 

HPS

  • MicroSD Socket
  • Gigabit Ethernet with RJ45
  • USB OTG with Micro USB Connector
  • UART to USB with Mini USB Connector
  • RTC
  • LED x1, Button x1, Cold Reset Button
  • 1x6 GPIO Header

 

Dashboard System

  • Input Power Monitor
  • FPGA and Board Temperature Monitor
  • Fan Control and Monitor
  • Auto Fan Speed
  • Auto Shutdown

 

Power Source

  • 12V from 2x4 PCIe connector
  • 12V from Samtec connector (reserved for carrier board)

 

Block Diagram

 

Apollo Developer Kit

  • The Kit is composed by
    • Apollo S10 Module (heatsink installed)
    • Apollo Carrier Board

  • The Apollo Carrier Board features includes:
    • PCIe Gen3 x4 via Thunderbolt 3 (Type-C Connector)
    • USB Downstream port via Thunderbolt 3 (Type-A Connector)
    • Two QSFP connectors (40G Ethernet)
    • Clock Generator to provide reference clock for transceiver IP
    • LED x4, Button x2, Switch x2
    • 2x20 GPIO Expansion Header. Adjustable IO Standard 3.3V/2.5V/1.8V.
  • The Block Diagram of Apollo Carrier Board

 

 

Connection to FMC Daughter Card:

  • Connect to 12G SDI-FMC Daughter Card:

 

  • Connect to D8M-FMC Daughter Card:

 

  • Connect to ADC-FMC Daughter Card:

 

  • Connect to HDMI-FMC Daughter Card:

 

  • Connect to XTS-FMC Daughter Card:



Overview Layout
Newsroom | About Terasic | Products | Turnkey Solutions | Training | FAQ | Contact Us | Subscribe | Facebook | YouTube