FPGA Device
5SGXEA7N2F45C2N
- 622K Logic Elements (LEs)
- 57.16 Mbits Memory
- 256 Variable-precision DSP Blocks
- 512 18x18-bit Multipliers Blocks
- 28 Fractional PLLs and 4DLLs
- *FPGAs with higher LEs are also available. Please contact Terasic sales team.
FPGA Configuration
- MAX II CPLD EPM2210 System Controller for Fast Passive Parallel (FPP x16) Configuration
- On-board USB-Blaster II for use with Quartus II Programmer
Memory
- 128MB Flash with a 16-bit Data Bus
- 2MB SSRAM (1M x 16)
DDR3 SO-DIMM Socket
- Up to 8GB Capacity
- Maximum Clock Rate at 933 MHz
On-board Clocks
- 50 MHz Fixed Oscillator
- CDCM6208 Programmable PLL
- LMK04906B Programmable PLL
SMA Connectors
- SMA Connector Pair for Differential Clock Input and Output
Buttons, Switches and LEDs
- 4 User-controllable LEDs
- 4 Buttons for User-defined Inputs
- 4 Slide Switches for User-defined Inputs
PCI Express Gen 3 x4 Connector
- Support PCI Express Gen 3 x4 (8.0Gbps/lanes)
- High-speed Transceiver Channels up to 8 Gbps
- Support Downstream Mode
Two Serial ATA Ports
- SATA 3.0 Standard at 6Gbps Signaling Rate
Four FPGA Mezzanine Card (FMC) Connectors
- 2 HPC (high-pin count) FMC connectors up to 172 x2 Single-end I/O, 2 LPC (low-pin count) FMC connectors up to 76 x2 Single-end I/O
- 10 Transceiver Channels for each HPC FMC connector and 1Transceiver Channel for LPC each HPC FMC connector
- FMC VITA 57.1 Compliant
- Adjustable VADJ : 1.2V/1.5V/1.8V/2.5V/3.0V.
- Don’t support bidirectional LVDS due to Stratix V device only support single directional LVDS
One 40-pin Expansion Header
- 36 FPGA I/O pins; 4 power and ground lines
- I/O standards: 3.3V
Power
- DC 12V Input
Block Diagram
Expansion with FMC Connector
Connect to the FMC daughter cards: XTS-FMC and HDMI-FMC
Connect to the D8M-FMC FMC daughter card
Connect to TI JESD board through Terasic JESD-FMC adapter card
Board to board connection through FMC cable
Expansion with PCI Express Cabling Connector
Connect to PC with PCIe Cabling and Terasic PCA adapter card
Board to board connection through PCIe Cable
Expansion with SATA Connector
Board to board connection through SATA cable
Expansion with GPIO Connector
Connect to the D5M
daughter card
Connect to the MTL2
daughter card
Connect to the LT24 daughter card