VEEK-MT2S

VEEK-MT2S

DE10-Standard Development Board

Cyclone V SX SoC—5CSXFC6D6F31C6N

  • Dual-core ARM Cortex-A9 (HPS)
  • 110K programmable logic elements
  • 5,761 Kbits embedded memory
  • 6 fractional PLLs
  • 2 hard memory controllers

Configuration Sources

  • Serial configuration device – EPCS128 for the FPGA
  • On-board USB Blaster II (normal type B USB connector)

Memory Device

  • 64MB (32Mx16) SDRAM for the FPGA
  • 1GB (2x256MBx16) DDR3 SDRAM for the HPS
  • microSD card socket for the HPS

Peripherals

  • Two USB 2.0 Host Ports (ULPI interface with USB type A connector) on HPS
  • UART to USB (USB Mini B connector)
  • 10/100/1000 Ethernet
  • PS/2 mouse/keyboard
  • IR emitter/receiver
  • I2C multiplexer

Connectors

  1. One HSMC expansion header (used for MTLC2)
  2. One 40-pin expansion header
  3. One 10-pin ADC input header
  4. One LTC connector (one Serial Peripheral Interface (SPI) master ,one I2C bus, and one GPIO interface)

Display

  • 24-bit VGA DAC
  • 128x64 dots LCD Module with Backlight on HPS

Audio

  • 24-bit CODEC, Line-in, line-out, and microphone-in jacks

Video Input

  • TV decoder (NTSC/PAL/SECAM) and Video-in connector

ADC

  • Sample rate: 500 KSPS
  • Channel number: 8
  • Resolution: 12 bits
  • Analog input range : 0 ~ 4.096 V

Switches, Buttons and LEDs

  • 5 user keys (4 for the FPGA and 1 for the HPS)
  • 10 user switches for the FPGA
  • 11 user LEDs (10 for the FPGA and 1 for the HPS)
  • 2 HPS reset buttons (HPS_RESET_n and HPS_WARM_RST_n)
  • Six 7-segment displays

Sensors

  • G-Sensor on HPS

Power

  • 12V DC input

Capacitive Multi-touch Screen Module

LCD Display

  • 7-inch TFT LCD with pixel resolution of 800*480
  • 16 million colors (8-bit RGB)
  • LED backlight

Capacitive Multi-Touch

  • Five points multi-touch
  • I2C interface
  • Gesture supporting

Gesture Table

  • One Point

  • Two-Point

8-Megapixel Digital Image Sensor

  • 3,264H x 2,448V active pixels with Bayer color arrangement
  • Sensitivity 940mV/Lux-sec
  • Gesture supporting

Ambient Light Sensor

  • Precise illumination measurement under diverse lighting conditions
  • Programmable interrupts
  • 16-bit digital output with I2C fast-mode at 400 kHz
  • Programmable analog gain and Integration time
  • 50/60Hz lighting ripple rejection

MPU9250 Accelerometer Features

  • Digital-output triple-axis accelerometer
  • Programmable full scale range of ±2g, ±4g, ±8g and ±16g and integrated 16-bit
  • Self-test

MPU9250 Gyroscope Features

  1. Digital-output X-, Y-, and Z-Axis angular rate sensors
  2. User-programmable full-scale range of ±250, ±500, ±1000, and ±2000°/sec and integrated 16-bit ADCs
  3. Self-test

MPU9250 Magnetometer Features

  1. 3-axis silicon monolithic Hall-effect magnetic sensor with magnetic concentrator
  2. Wide dynamic measurement range and high resolution with lower current consumptions
  3. Output data resolution of 14 bit (0.6μT/LSB) or 16 bit (15μT/LSB)
  4. Full scale measurement range is ±4800μT
  5. Magnetometer normal operating current: 280μA at 8Hz repetition rate
  6. Self-test function with internal magnetic source to confirm magnetic sensor operation on end products
Overview
Layout