From Terasic Wiki

Chapter 1 Introduction

This Manual will introduce the various application demonstrations on DE10-Advance. These demonstrations cover most of the interfaces on DE10-advance. Let users familiarize using these interfaces of the DE10-Advance development board. Demonstration according to FPGA and HPS Fabrics are divided into three categories:

• Pure use of FPGA fabric resources (Chapter 2)
• Pure use of HPS fabric resources (Chapter 3)
• Use both FPGA and HPS fabric resources (Chapter 4)

In addition, the PCIe example of de10-advncorolla will be described separately in one chapter(Chapter 5) because of its high content.

Finally, to complete the following demonstration, user needs to install the following software in the computer:

• Intel Quartus® Prime Design Software Version 18.0 or later.
• Intel SoC Embedded Design Suite (EDS)

Note : Due to the limitations of the IP version, the Displayport and web socket demo needs to be used with Quartus 17.0.

Chapter 2 Examples For FPGA

This chapter provides examples of advanced designs implemented by RTL or Qsys on the DE10-Advance board. These reference designs cover the features of peripherals connected to the FPGA, such as DDR4, PCIe, HDMI and USB Controller. All the associated files can be found in the directory \Demonstrations\FPGA of DE10-Advance System CD.

• 2.1 Factory Default Code
• 2.2 Basic Nios II control demo for Programmable PLL/Temperature/Power Monistor/9-axis sensor
• 2.3 Nios DDR4 SDRAM Test
• 2.4 RTL DDR4 SDRAM Test
• 2.5 USB Type-C DisplayPort Alternate Mode
• 2.6 Type-C FX3 Loopback
• 2.7 HDMI TX in 4K Resolution
• 2.8 HDMI TX and RX in 4K Resolution
• 2.9 Low Latency Ethernet 10G MAC Demo
• 2.10 Socket Server
• 2.11 PCIe_Fundamental
• 2.12 Auto Fan Speed Control

Chapter 3 Examples for HPS SoC

Chapter 4 Examples for using both HPS SoC and FGPA

Chapter 5 PCI Express Reference Design

• 2.11 PCIe_Fundamental
• 2.12 PCIe_DDR4