DE10-Advance Hardware Manual revC

From Terasic Wiki

(Difference between revisions)
Jump to: navigation, search
(→Chapter 6 System Clocks)
(→Chapter 4 FPGA Fabric component)
 
(15 intermediate revisions not shown)
Line 15: Line 15:
=Chapter 4 FPGA Fabric component=
=Chapter 4 FPGA Fabric component=
-
*[[DE10-Advance Hardware Manual revC Chapter4 USB Type C Port| 4.1 USB Type C Port]]
+
*[[DE10-Advance Hardware Manual revC Chapter4 User Interface (LED/7-SEG/Button/Switch)| 4.1 User Interface (LED/7-SEG/Button/Switch)]]
-
*[[DE10-Advance Hardware Manual revC Chapter4 SFP+ Connector 4.2 SFP+ Connector]]
+
*[[DE10-Advance Hardware Manual revC Chapter4 USB Type C Port| 4.2 USB Type C Port]]
-
*[[DE10-Advance Hardware Manual revC Chapter4 SATA| 4.3 SATA]]]
+
*[[DE10-Advance Hardware Manual revC Chapter4 SFP+ Connector |4.3 SFP+ Connector]]
-
*[[DE10-Advance Hardware Manual revC Chapter4 PCIe| 4.4 PCIe]]
+
*[[DE10-Advance Hardware Manual revC Chapter4 SATA| 4.4 SATA]]
-
*[[DE10-Advance Hardware Manual revC Chapter4 DDR4| 4.5 DDR4]]
+
*[[DE10-Advance Hardware Manual revC Chapter4 PCIe| 4.5 PCIe]]
-
*[[DE10-Advance Hardware Manual revC Chapter4 HDMI Transmitter and Receiver| 4.6 HDMI Transmitter and Receiver]]
+
*[[DE10-Advance Hardware Manual revC Chapter4 DDR4| 4.6 DDR4]]
-
*[[DE10-Advance Hardware Manual revC Chapter4 Gigabit Ethernet| 4.7 Gigabit Ethernet]]
+
*[[DE10-Advance Hardware Manual revC Chapter4 HDMI Transmitter and Receiver| 4.7 HDMI Transmitter and Receiver]]
-
*[[DE10-Advance Hardware Manual revC Chapter4 FMC Connector| 4.8 FMC Connector]]
+
*[[DE10-Advance Hardware Manual revC Chapter4 Gigabit Ethernet| 4.8 Gigabit Ethernet]]
-
*[[DE10-Advance Hardware Manual revC Chapter4 Temperature Sensor,Fan Control and Power Monitor| 4.9 Temperature Sensor,Fan Control and Power Monitor]]
+
*[[DE10-Advance Hardware Manual revC Chapter4 FMC Connector| 4.9 FMC Connector]]
-
*[[DE10-Advance Hardware Manual revC Chapter4 Gyroscope, Accelerometer and Magnetometer| 4.10 Gyroscope, Accelerometer and Magnetometer]]
+
*[[DE10-Advance Hardware Manual revC Chapter4 Temperature Sensor,Fan Control and Power Monitor| 4.10 Temperature Sensor,Fan Control and Power Monitor]]
 +
*[[DE10-Advance Hardware Manual revC Chapter4 Gyroscope, Accelerometer and Magnetometer| 4.11 Gyroscope, Accelerometer and Magnetometer]]
=Chapter 5 HPS Fabric Component=
=Chapter 5 HPS Fabric Component=
Line 35: Line 36:
*[[DE10-Advance Hardware Manual revC Chapter5 GPIO Header| 5.6 GPIO Header]]
*[[DE10-Advance Hardware Manual revC Chapter5 GPIO Header| 5.6 GPIO Header]]
-
= Chapter 6 System Clocks=
 
=Chapter 6 System Clocks=
=Chapter 6 System Clocks=
-
Figure 6-1 shows the Clock Net connected to FPGA on DE 10-Advanced.
+
*[[DE10-Advance Hardware Manual revC Chapter6 System Clocks| Chapter 6 System Clocks]]
-
The Si5350c provides the fixed system frequencies to FPGA, HPS and other important components. There are four 50 MHz connected to the dedicated clock pins of the FPGA, which can be used by PLL for clock multiplier or frequency division. In addition, there are Programmable PLL (CDCM6280, BGA/FXXXXX) available for providing the clocks to the peripherals on the board, such as HDMI and communication interfaces.
+
= Chapter 7 Power =
-
There is a default clock when power on, it also supports the users to change the frequency via I2C interface for special requirement.
+
*[[DE10-Advance Hardware Manual revC Chapter7 Power|Chapter 7 Power]]
 +
=Chapter 8 DE10-Advanced System Builder=
 +
This chapter describes how users can create a custom design project with the tool named DE10-Advanced System Builder.
 +
*[[DE10-Advance Hardware Manual revC Chapter8 Introduction|8.1 Introduction]]
 +
*[[DE10-Advance Hardware Manual revC Chapter8 General Design Flow |8.2 General Design Flow]]
 +
*[[DE10-Advance Hardware Manual revC Chapter8 Using DE10-Advanced System Builder|8.3 Using DE10-Advanced System Builder]]
-
:::[[File:De10 advanced revc clock net connected to FPGA.jpg|600px]]
+
=Chapter 9 RevC known issues=
 +
*[[DE10-Advance Hardware Manual revC Chapter9 known issues|Chapter 9 Known Issues]]
-
:::::::::Figure 6-1 System Clock  in the DE10-Advanced
 
-
 
-
 
-
:::[[File:Figure 6-2.png|550px]]
 
-
 
-
::::::::Figure 6-2 shows the default settings for different PLLs
 
-
 
-
= Chapter 7 Power =
 
-
=Chapter 8 DE10-Advanced System Builderr=
+
[[DE10-Advance document revC|'''Back''']]

Latest revision as of 16:54, 11 December 2018

Contents

Chapter 1 Overview

Chapter 2 Board Components

This chapter provides an introduction to the features and design characteristics of the board.

Chapter 3 Board Setting and Status component

This chapter describes all the setting devices on DE10-Advanced board and their functions, such as Switches and Headers. We also will describe the function of some status LEDs. The JTAG interface will be described at the end of this chapter.

Chapter 4 FPGA Fabric component

Chapter 5 HPS Fabric Component

This section introduces the interfaces connected to the HPS section of the Arria 10 SoC FPGA. Users can access these interfaces via the HPS processor.

Chapter 6 System Clocks

Chapter 7 Power

Chapter 8 DE10-Advanced System Builder

This chapter describes how users can create a custom design project with the tool named DE10-Advanced System Builder.

Chapter 9 RevC known issues


Back

Retrieved from "http://www.terasic.com.tw/wiki/DE10-Advance_Hardware_Manual_revC"